Fluted Tambour Wood Wall Panels

We have designed the fluted wall panels to join both width-ways and long ways seamlessly so any length or width can easily be achieved.

Transform your space with our easy-to-install fluted panels. Here's a simple step-by-step guide to help you achieve a flawless installation.

Step 1: Preparation
Ensure that the area where you plan to install the tambour panel is clean, dry, and free from obstructions.

Step 2: Gather Necessary Materials
You will need a strong adhesive glue for the installation. Optionally, a nail gun can be used for additional reinforcement.

Step 3: Glue Application
Apply an even layer of the adhesive glue on the back of the tambour panel. Make sure the edges and corners are well covered for optimal adhesion.

Step 4: Positioning the Panel
Carefully place the panel onto the desired spot, pressing firmly to make sure the glued surface makes full contact with the wall.

Step 5: Optional - Nail Gun Reinforcement
For extra security, you may use a nail gun to affix the panel onto the wall. This step is optional and depends on the type of wall and your preference.

Step 6: Clean Up
Immediately after installation, clean any excess glue that may have seeped out from the sides of the panel using a damp cloth.

Step 7: Drying Time
Allow ample time for the glue to dry completely. Refer to the adhesive manufacturer's instructions to know the recommended drying time.

Step 8: Repeat for Remaining Panels
Follow the same process for each panel, ensuring a proper alignment between panels for a seamless finish.

We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller. They also join together seamlessly if you need bigger.

Yes, fluted wall panels are highly flexible. They can easily wrap around curved surfaces, such as kitchen islands and walls, making them a versatile choice for various design projects.

The panels will be absolutely fine in these areas, as long as they are not in direct contact with water. We do recommend applying a water-resistant finish to the front of the slats to protect them against any moisture or humidity wherever possible though.

The fluted tambour panel range is designed for interior use only.

It is straightforward to adjust the panels to fit around any object! Simply use a sharp, fine-tooth saw to cut through the panels and slats. If you are only cutting through the backing, scoring the mesh with a utility knife will quickly cut down the panels.

You can mount the fluted wall panels on all surfaces including brick, concrete and plasterboard. Ensure the surface is smooth, clean and dust-free for the best adhesion.

The wood used is always from the same source so they will always look more or less the same. It is natural wood, however, so knots, slight cracks and colour variations can occur. Get in touch if you would like us to send you pictures of the exact batch you could potentially receive.

The panels have been designed to have the edge exposed, with the wood finish visible on all sides of the slat.

If installing on a frame, you certainly can!

We do, and we offer free delivery to mainland UK for a range of our fluted wall panel range! You are also welcome to collect directly from our warehouse.

You can return unused panels within 30 days after delivery.

Yes, you can purchase a sample box by clicking here.